Disassembly & repair, Rod seal removal – Magnum Venus Plastech TALON Gun Internal Mix User Manual
Page 17
Advertising
Talon Internal Mix Gun Manual
Rev. 10/2013
Page | 17
Disassembly & Repair:
WARNING: Always remove fluid pressures before working on the unit.
Rod Seal Removal:
1. Remove Trigger Pin and push the Trigger assembly
forward.
2. Use 7/16 Ratchet (or wrench) to remove the Rod Seal
Housing. Note the material Rod will come up with the
housing
3. Remove Rod Seal assemblies and Housing O-rings.
Note: Do not use petroleum base oil or grease on
purple O-rings
Rod Seal Housing
O-Ring - Seal Housing
Actuating Rod
Rod Seal Assembly
Seal Housing - O-ring
Rod Seal Assembly
Rod Seal Housing
Seal Housing
Actuating Rod
Advertising