Luminex xPONENT for MAGPIX 4.2 - Manual (Page 39)

1. Open the Samples page.
2. In the Sample Lists section, select the protocol you are using for the sample list, then
click Create New Samples. The Create Sample tab opens.
3. In the ID box, type the sample ID.
4. Type a patient first name in the First name box (optional).
5. Type a patient last name in the Last name box (optional).
6. To add a comment about the sample, type it in the Comment box; this is optional.
7. Click Save to add the sample to the Sample list.
xPONENT for MAGPIX 4.2 Software User Manual
26