How to set the dust cup, How to remove the dust cup, How to use the dust cup – MAX PJR265(CE) User Manual

Page 19

Advertising
background image

19

10. LED lamp

(Fig. Y) When the Trigger switch is pulled, the
LED lamp (Fig. Y 6) lights up.
When 10 ~ 15seconds past after releasing the
Trigger switch, it goes off.

Do not directly look in the LED lamp's light.
Do not point the LED lamp's light to any-

one's eyes.

Pointing the LED lamp's light to the eyes may
cause serious injury.

11. Dust cup (Optional)

When attaching the Dust cup to the tool,

keep hands and fingers away from the Trig-
ger switch, and make sure that the Battery
pack is not set in the tool.

The Dust cup reduces falling down of the dusts
when overhead drilling / hammer-drilling.
The Dust cup is available as an optional acces-
sory.

HOW TO SET THE DUST CUP

(Fig. Z) Fit the

portion to the side handle.

HOW TO REMOVE THE DUST CUP

(Fig. AA) Hold near the bottom of the Dust cup,
then take it out.

Before removing the Dust cup, eject the

dust in the Dust cup.

HOW TO USE THE DUST CUP

(Fig. AB) Fit the front end of the Dist cup to the
object, then operate the tool.

When operating the tool, do not hold the

Dust cup.
If the tool is held at the Dust cup, it may drop
off and cause serious injury.
Make sure to hold the tool with both hands, at
the Side handle and the grip.

Use the Dust cup only for Concrete, Brick

and Stone applications.
Do not use for Metal and other objects.
Using the Dust cup for Metal and other objects
may damage the Dust cup, due to the hot
ground metal pieces or like.

When storing the Dust cup, do not com-

press it.
If the Dust cup is kept compressed for a long
time, it may not be unable to recover the origi-
nal shape.

12. Drilling / Hammer-drilling times

per charge

Regarding the drilling / hammer-drilling

times per charge, it depends on the condi-
tion of the Battery pack, hardness of the
material and the performance of the bit.
The following chart is based on the brand-new
battery and hammer-drilling in Concrete.

WARNING

WARNING

CAUTION

Mode

Bit diameter

Depth

Drilling times

Slow

φ4.3mm

30mm

Apprx. 221

Normal

φ6.5mm

30mm

Apprx. 184

Normal

φ12.5mm

30mm

Apprx. 105

Normal

φ14.5mm

100mm

Apprx. 20

Normal

φ18mm

60mm

Apprx. 26

Normal

φ26mm

60mm

Apprx. 7

WARNING

WARNING

CAUTION

CAUTION

PJR265_CE.book 19 ページ 2010年10月13日 水曜日 午後4時51分

Advertising