Max Machinery 164 SERIES SIGNAL CONDITIONER_CONVERTER - Manual (Page 2)

Page 2 164-110-350 Max Machinery, Inc.
GENERAL DESCRIPTION
The Max 164 Series Signal Conditioner/Converter is designed to convert a flow meter
transmitter signal to a properly scaled and stabilized voltage or current output. An on-board
power supply furnishes ± 15V to the transmitter. The Model 164 is powered by a 110 VAC or
220 VAC source. The unit is available as a stand alone circuit board only or in Nema 4 or
explosion proof enclosure.
MODEL Description
164-110-010 Voltage or Frequency input signal
conditioner, open P.C. board assembly.
Use with Model 272, 284, 286 or 289
transmitters. Provides 0-2 V, 0-10 V
and 4-20mA outputs.
164-110-007 PCA with additional damping for low flow.
164-120 Model 164-110-010 installed in a NEMA 4 Box
The Model 164 is designed to be used with either transmitters that provide a voltage output,
such as the Max 272 Series, or transmitters that provide a pulse or square wave output,
such as the Max 284, 286 or 289. The Model 164 has a selector switch to select either
analog or pulse transmitters.
Discontinued