Alpine SEC-8028 - Manual (Page 6)

English
6
Remote Control
Transmitter
(SEC-8428 Remote Control)
1
2
3
4
Two Four-Button Remote Control
Transmitters (part number SEC-8428) are
provided with the SEC-8028 Security
System. The SEC-8428 Remote Control
allow the arming, disarming, panicking, and
EXT activation of the SEC-8028 Security
System from a remote location. In addition,
the SEC-8428 will also allow you to control
a second security system.
Following is a brief description of the
functions of each of the components of the
remote control transmitter:
1. LED Indicator
The LED will illuminate when the signal
is being transmitted.
2. TX/PANIC Button
Press this button to:
1. Arm and Disarm the system.
2. Panic the system.
3. EXT1/VALET Button
Press this button to:
1. Activate the EXT1 output.
2. Place the system in Valet mode.
4. EXT2/EXT3 Button
Press this button to:
1. Activate the EXT2 output.
2. Activate the EXT3 output.
5. MODE Button then TX Button
Press the MODE button followed by the
TX button (within 5 seconds) to silently
Arm and Disarm the system.
NOTE:
Consult your Alpine dealer to determine if
your second security system is compatible
for two car operation.
5