Micromod MOD: 30ML Functions Data Base Reference - Manual (Page 103)

MOD 30ML Functions
CONFIGURATION EXAMPLES
• Select Properties from the menu. The Algorithm Properties of the Loop Cpd block will be
displayed next as shown in the next figure.
• Type Control in the Name field.
• Type a description "This compound is for the Flow Control Loop"
• Click
on OK to close the Properties.
Figure 3. 13. Loop Compound Properties
7. Open the loop compound:
• Right-Click on the Control compound (Loop compound you just named) again and select
Open compound at the bottom of this menu.
• The loop compound will open as shown below and will have a Loop block (LP) by default.
Figure 3. 14. Loop Block
3-9