Micromod MOD: 30ML Functions Data Base Reference User Manual
Page 39
MOD 30ML Functions
DISPLAY INTERFACE BLOCK
30
Port 3 Communications Error Counter (CMERRCTR)...................................................– WR
Counts instances (from 0 to 65535) of framing, parity errors, etc. on internal communications
port 3 (used by faceplate and analog inputs).
31
Keyboard Error Counter (KBERRCTR) ...........................................................................– WR
Counts instances (from 0 to 65535) of no response from keyboard.
32
Flash Periods: Slow - Off Counts (SFOFFCNT) ............................................................. CWR
Number of 50 msec ticks in the 'off' state of slow alarm flashing.
33
Flash Periods: Slow - On Counts (SFONCNT) ............................................................... CWR
Number of 50 msec ticks in the 'on' state of slow alarm flashing.
34
Flash Periods: Fast - Off Counts (FFOFFCNT) .............................................................. CWR
Number of 50 msec ticks in the 'off' state of fast alarm flashing.
35
Flash Periods: Fast - On Counts (FFONCNT) ................................................................ CWR
Number of 50 msec ticks in the 'on' state of fast alarm flashing.
36
Flash Periods: Activity - Off Counts (ACOFFCNT) ........................................................ CWR
Number of 50 msec ticks in the 'off' state for flashing lines and bars when instrument
generated activity messages (bad quality, error messages such as OVERFLOW, etc.) occur.
37
Flash Periods: Activity - On Counts (ACONCNT) .......................................................... CWR
Number of 50 msec ticks in the 'on' state for flashing lines and bars when instrument
generated activity messages (bad quality, error messages such as OVERFLOW, etc.) occur.
38
Entry Timeout (ENTRTIME) ............................................................................................. CWR
Number of 50 millisecond ticks before an entry activity (ENT flashing) will time out and return
to the previous state.
USER
1 to 65534 ENTry mode will timeout and change x millisecond ticks after last
keyboard entry change. Enter 1 to 65534 in the subsequent field.
NONE
65535 No timeout. Entry time out disabled and ENT will continue to flash
until the TAG key is pressed.
39
Date Format (DATEFMT).................................................................................................. CWR
Format for displaying date.
US 0
mm/dd/yy
EURO 1
dd/mm/yy
40
Shutdown Instrument on Faceplate Comm Failure (SHUTFAIL).................................. CWR
Use to shut down the instrument after a faceplate communication error lasts for 3 seconds.
NO
0
Instrument will not shut down after a faceplate communication error.
YES
1
Instrument will shut down 3 sec. after a faceplate communication
error.
60
Remote Display Number Input (REMDISP)..................................................................... CWR
NONE, source pointer connection to a COUNT variable or a local COUNT variable. Writeable
only if local. Value should be <= the number of displays in display list, and will be ignored
otherwise. When a remote or local input is present, normal front face navigation via the tag
key is disabled. See additional description for Remote Display Input on page 2-34.
2-31