Micromod MOD: MODCELL Application Builder Software - Manual (Page 88)

Application Builder
CONFIGURATION
NOTES 1. R VERSION command applies to any instrument on the ICN and is returned
as follows (current versions are bold):
Description Return Data
1701R Controller XL Version 3 CxB_X3xxxxxxx
1701R Controller XL Version 2 CxA_X2xxxxxxx
1701R Controller XL Version 1 Cx__X1xxxxxxx
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1700R Controller Version 5
Cx____5xxxxxx
1700R Controller Version 4 Cx____4xxxxxx
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1700J Recorder Version 7
RxA__7xxxxxxx
1700J Recorder Version 6 RxA__6xxxxxxx
1700J Recorder Version 5 RxA___5xxxxxx
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1700N Math Unit Version 5
Ax___5xxxxxxx
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1710 Sequence and Logic Unit Version 6
SxA___6xxxxxx
1710 Sequence and Logic Unit Version 5 SxA___5xxxxxx
1710 Sequence and Logic Unit Version 4 Sx____4xxxxxx
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2001P MODCELL Logic Controller Version 6
BxA__6xxxxxxx
" (Versions 1, 2, 3, 4, 5 follow in same fashion) BxA__...
2002P MODCELL Regulatory Controller Version 3 DxA__3xxxxxxx
" (Versions 1, 2 follow in same fashion) DxA__...
2004P MODCELL Advanced Controller Version 3 GxA__3xxxxxxx
" (Version 2 follows in same fashion) GxA__...
2004P MODCELL Batch Controller Version 1 GxA__1xxxxxxx
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
1800P MOD 30ML Controller Functions Version 2
IxA__2xxxxxxx
" (Version 1 follows in same fashion) IxA__1...
2. READ Q returns the most recent event first. The screen displays up to 15
events and a prompt to continue appears if necessary.
3. R SD type is an engineering debug tool command that calls specific
instrument registers as displayed on the Shutdown Information page. Type
indicates which shutdown information to read. Type may be:
I = instrument information (default if type is not specified)
MP = module information at power up
M = module information
Be sure to write protect the memory module if the memory module is being
placed on another instrument to examine the shutdown information. Failure
to write protect the module will cause the shutdown information area to be
written over by the instrument when it powers up.
5-24