ADIC Switches - Manual (Page 27)

3-5
March 31, 1999
3.3 Scope
These instructions apply for the ADIC/GRAU Storage Systems AML/J
systems.
Further safety regulations for the components used in the system are not
put out of force by these instructions.
Information
The documentation of the external manufacturers are integral part of
the AML/J documentation.
3.4 Protective devices
The AML/J system is equipped with the following protective devices:
• Monitored access to the system
• Mechanical interlock
• Main switch
3.4.1 System access
The AML/J system is surrounded completely by panelling. Access to the
system is possible only through a monitored door (or doors).
The panelling of the AML/J system separates the danger area from the
normal working area. The danger area of the system is the area in which
there is a risk of injury due to a movement of the components.
WARNING!
Movements of the mechanical components in the AML/J system can
cause severe injuries. The access to the system may be opened only by
authorized personnel.
3.4.2 Mechanical lock
The access door(s) to the system can be opened from the outside only
with a key. Authorized personnel are responsible for the safety of the
key.
3.4.3 Main switch
If you switch off the main switch, you stop the movement electronics and
separate the system from the power supply. All movements of the robot
are stopped immediately. Switch the main switch off immediately in the
case of risk of injury or possible material damage.
!