ADIC Switches - Manual (Page 30)

4-2 Operation
DOC D00 025-A
Table 4-1: Control panel switches
Switch Description
1 Main switch S3 Switching on the main supply voltage.
WARNING!
Dangerous voltage!
The following are not in the
circuit of the main switch:
• Drives
• AMU computer
<CONTROL OFF> lights up if the control is
ready but not active.
2 Only in sys-
tems
with HICAP
illuminated
pushbutton
(green)
CONTROL
ON
The control lamp lights up after actuation.
Activates the control
Prerequisites
Main switch switched on, all doors are closed
3 Mains switch
(back of the
control unit) Switching on the line voltage including that
for AMU computer and monitor.