Perma Pure Baldwin-Series MP5400 - Manual (Page 14)

Section H: Default Setpoints 14
H: D
EFAULT
S
ETPOINTS
eCOOL Mini Heat Exchangers:
Setpoint Temperature = 5°C
Ready (Run) Temperature = 10°C
Cooler must operate below the Ready Temperature to avoid the over temperature
alarm condition.
Relay Board:
Relay contacts are in their Normal state (de-energized state) during an alarm
condition.
Analog output 0-4.5 VDC equates to 0-10°C corresponding to each thermocouple.