Perma Pure Baldwin-Series MP5400 - Manual (Page 23)

Series 810 General Specifications:
Flow Rate: 50 fixed flow rates available - .4 to 987mL/min
Mounting: 18 gauge zinc plated steel mounting plate.
Dimensions: 5.12"W x 3.74"H x 4.1"D maximum.
Motor: Shaded pole gearmotor
Stainless steel output shaft
Plastic cooling fan designed for operation at 25°C ambient temp.
Pressures: Up to 20 psi (2.7 bar)
Fluid Contacts:
Fluid being dispensed contacts tubing only
Pump:
Polypropylene with stainless steel fasteners self priming up to 29 ft. (8.8m)
Can be run dry continuously and is non-siphoning.
Rollers:
Nylon with bronze bearing, or for corrosive applications, UHMW polyethylene rollers with
bronze bearing
Roller bracket:
Powdered iron with hardened steel roller pins and spring tension fastener. Roller bracket
assembly attaches directly to motor output shaft.
Tubing:
Standard pumps designed to squeeze tubing with a maximum 60 Shore A durometer.
OPTIONS
Electrical:
24 to 240 VAC
50 Hz, 60 Hz or 50/60 Hz
Flow Rates:
Dual heads allow you to choose any flow rate up to 900 mL/min.