Andrew 9.3-Meter ESA - Manual (Page 20)

Step 6
20
Installation Procedures
Figure 15
Refer to Figure 15. Raise assembled panning/pivot assembly and loosely attach 301786
azimuth pivot assembly to upper portion of 200068 joint assembly as shown.
•
Use 7/8 by 2-1/2 inch (64 mm) hardware
Note: Position mounting hardware as shown to ensure proper panning frame clearance.
Install 7/8 inch flatwashers between 301786 pivot assembly and 200068 joint assembly.
301786
AZIMUTH PIVOT
ASSEMBLY
7/8”
FLATWASHERS
7/8 x 2-1/2”
(64 mm)