Poweramp POWERHOOK SERIES - Manual (Page 12)

INSTALLATION
This manual covers three models of PowerHook® truck restraints: KS4, KS5, KS6. See Figures 1, 2, and 3. In
addition to the hydraulically actuated truck restraint, PowerHook® has a programmable electronic controller and
Dock alert, a dock communication systems
The installation instructions are to be used as basic guide lines for proper installation. There may be different
techniques to install the levelers, but installation must conform to the correct welding and shimming as shown in
the oweners/users manual
Fig. 1
KS4 PowerHook
®
The PowerHook
®
KS4 box-type truck
restraint is ideally suited for Vertical
Leveler installations. The larger box form
with insulated lid is fully assembled and
ready to be poured in place during the
construction process.
Fig. 2
KS5 PowerHook
®
The PowerHook ® KS5 pan-type truck
restraint is an economical retrofit for dock
levelers. The fully assembled pan ships
complete with all the concrete anchors
needed to insure a secure installation.
Fig. 3
KS6 PowerHook
®
The PowerHook ® KS6 free-standing
frame type truck restraint is fully installed
and integrated into full height leveler
stand. It’s easy to install...just weld it into
position and run power to it.
4111-0010 — Nov 2010 10