Poweramp POWERHOLD STD & SC 11.2006 - Manual (Page 20)

SYSTEM'S, INC. STANDARD WARRANTY
POWERHOLD VEHICLE RESTRAINT
Poweramp warrants the locking unit, welded main frame, hydraulic cylinders and hoses, and all
electrical components to be free of defects in material and workmanship for a period of one (1)
year when installed and used in accordance with the Powerhold Owner’s Manual. Systems, Inc.
further guarantees the hydraulic components except for the solenoid valves on all Powerhold
units for a period of one (1) year from date of shipment. Specifically, this guarantee applies to (1)
hydraulic cylinders, (2) pressure lines provided by the factory and (3) the hydraulic pump and
motor.
In the event of any defect covered by this warranty, manufacturer will remedy said defect by
repairing or replacing all defective parts, bearing all of the costs for parts, labor and
transportation.
All warranty claims will be settled on a timely basis when defects are found to be from other than
improper installation, operating contrary to instructions or beyond rated load capacities, abuse,
careless or negligent use, or failure to maintain the unit as recommended by the owner’s manual.
There are no warranties, either expressed or implied, including any implied guarantees of
merchantability or fitness for a particular purpose which shall extend beyond the guarantee
periods indicated above. This guarantee is valid only if the unit(s) is unaltered from original
condition as delivered from the factory and a survey is completed by a Poweramp
representative.