Poweramp POWERHOLD STD & SC 11.2006 - Manual (Page 8)

GENERAL INFORMATION CONTINUED
B. OUTSIDE SIGNAL LIGHTS. These lights are located in the outside signal light
assembly. This light assembly is mounted in a location that is clearly visible to
the truck operator.
DESCRIPTION OF SIGNAL LIGHTS:
A. INSIDE SIGNAL LIGHTS. These lights are typically located on the PLC/
LOGIC control assembly. the assembly housing the light is to be
mounted in a location that is clearly visible to the dock attendant.
RED LIGHT
• IT INDICATES TO THE DOCK ATTENDANT THAT IT IS
NOT OK TO ENTER THE TRUCK. THE TRUCK ICC
BAR IS NOT ENGAGED BY THE POWERHOLD
RESTRAINT. THE BYPASS MODE AND WHEEL
CHOCKS MAY BE REQUIRED.
AMBER CAUTION LIGHT
• IT INDICATES TO THE DOCK ATTENDANT THAT IT IS
NOT OK TO ENTER THE TRUCK WHEN IN THE
"NORMAL" OPERATING MODE. THE UNIT HAS
BEEN ACTIVATED BUT HAS NOT ENGAGED THE
TRUCK ICC BAR. OR
• IT INDICATES TO THE DOCK ATTENDANT TO ENTER
WITH CAUTION WHEN IN THE "BYPASS"
OPERATING MODE. THE TRUCK ICC BAR IS NOT
ENGAGED BY THE POWERHOLD RESTRAINT.
GREEN LIGHT
• IT INDICATES TO THE DOCK ATTENDANT THAT IT IS
OK TO ENTER THE TRUCK . THE TRUCK ICC BAR
IS ENGAGED BY THE POWERHOLD
RESTRAINT.
WHEN THE LIGHT IS ON:
R
G
WHEN THE LIGHT IS ON:
IT INDICATES TO THE TRUCK OPERATOR
THAT IT IS NOT OK TO BACK IN OR PULL
AWAY FROM THE DOCK.
IT INDICATES TO THE TRUCK OPERATOR
THAT IT IS OK TO BACK IN OR PULL AWAY FROM
THE DOCK.
R
A
G
OUTSIDE SIGNAL
LIGHT ASSEMBLY.
4