PROLiNK PIC1005WN User Manual - Manual (Page 22)

EN 19
3.8. 3GPP/RTSP Settings
The IP Camera is able to be viewed from a 3G mobile phone, for detailed settings on the 3G mobile phone,
please refer to Appendix E.
Users can disable the 3G mobile access ability in this page. After the 3GPP/RTSP feature is disabled, no 3G
mobile phone is allowed to access the video of the IP Camera. When this is disabled, the RTSP stream with
MPEG2 audio is still working, please refer to Appendix F for more details about RTSP stream with MPEG2
audio.
When the 3GPP is enabled, the video frame rate, resolution and bandwidth for 3G mobile access could be set
independently from the video settings for LiveView (PC) access. The maximum allowed resolution is 352x255
and maximum allowed bandwidth is 256 kbps. When the audio is enabled for both 3GPP and LiveView (PC)
and the video/audio is displayed in LiveView, the audio will be disabled in 3G mobile display.
The “Access URL” line is the URL address for 3G mobile phone to input for seeing the video of the IP Camera.
Different 3G mobile may need to input this URL in different way, detailed information could be found in the
user manual of different 3G mobiles. Please be noticed that usually public IP address is needed for the IP
Camera, so that the 3G mobile could access the IP Camera’s video.
The default setting is “Enable 3GPP/RTSP”.
Figure 3-12: 3GPP/RTSP enabled page