Upgrade – PROLiNK PIC1005WN User Manual User Manual
Page 33
EN 30
3.15. Upgrade
If there is some new firmware available from the supplier of this IP Camera, you can upgrade the firmware on
this page. Please ask for the correct information about FTP server, username/password account and firmware
filename from your supplier, and then do this upgrade. A status message about the percentage done in the
upgrade procedure is displayed. Please be noticed that during the upgrade procedure, do not power off the IP
Camera, otherwise, the IP Camera could probably enter into the safe mode (section 3.18). After the upgrade
procedure is finished, the system will restart automatically.
You can upgrade from the ftp server or from the local file in your computer.
During this upgrade procedure, do not try to modify other settings or view the video.
Figure 3-22: Firmware upgrade settings page