PROLiNK PIC1005WN User Manual - Manual (Page 4)

EN 1
1. Introduction
The PROLiNK® PIC1005WN Wireless IP Camera (will be referred to as “IP Camera” for the entire document) is
designed with the “user-friendly” idea deep in mind. The user can install the IP Camera easily on his/her home network
and then access the IP Camera anywhere in the world through the accompanied video management software -
LiveView program without setting some complicated DNS name or changing the router’s settings. It’s just a plug &
play action.
With 3GPP/ISMA support, users can see the video of the IP camera on any 3G mobile phone anywhere, anytime. The
big difference is that there is software for downloading to the mobile phone so that the fixed IP address is not needed
for the IP camera. The video settings including frame rate, resolution and bandwidth could be different for PC
monitoring and mobile viewing.
For indoor surveillance and remote monitoring, the IP Camera provides the best image quality in its class, and
excellent performance. The IP Camera also provides the best bandwidth efficiency, it offers 640x480 resolutions, 30 fps
frame rate, real MPEG4 image compression ability. The built-in microphone enables remote users to not only view, but
also listen for additional monitoring options.
The NAS storage function can easily turn any NAS device to a NVR device. The schedule function provides full
scheduling of email/ftp sending, motion detection and NAS recording event. With the built-in Web server, the IP
Camera can also be managed from a standard web browser on a Windows computer.
With the very low light sensitive video sensor and IR LEDs, the IP Camera can work day and night, satisfying all home
security and indoor surveillance needs. With the motor controlled IR-cut filter, the day-time video quality is not
affected.
The IP Cam(w) provides both wireless IEEE 802.11 b/g and wired Ethernet network interfaces for flexible installation. It
supports the WEP and WPA (Wi-Fi Protected Access) security modes to provide the best security for wireless networks.
(IP Cam model only support wired Ethernet interface)
The IP Camera provides motion detection function. Users can easily setup this function and receive the notification
with the snapshot images through email and/or ftp when some motion events are detected.
The IP Camera is ideal for securing small businesses, home offices and residences over a local area network and/or the
Internet.
1.1. The Differences
It’s very easy to see the video of the IP Camera, you only need to key in the ID/Password of the IP CAM
anywhere in the world, and you DO NOT need to remember the IP address or domain name or DDNS name or
port number. And you do not need to modify the settings (like port mapping, fixed IP, DDNS, virtual server) of
the NAT/router devices, it’s just a plug & play usage.