PROLiNK WN2000 Wireless-N User Manual User Manual

Page 38

Advertising

32 -

BSSID: The MAC address of the connected AP. Fixed
and cannot be changed.

Authentication Type: The authentication type support
Open, WPA-PSK and WPA2-PSK.

Encryption Type: For Open authentication mode, the
selection of encryption type are NONE and WEP. For
WPA-PSK and WPA2-PSK authentication mode, the
encryption type supports both TKIP and AES.

Key Length: Only valid when using Open authentication
mode and WEP encryption. There are key lengths 5, 10,
13 and 26.
Key Index: Only valid when using Open authentication
mode and WEP encryption. There are 1~4 key index.
Key Material: The key material can be used to ensure the
security of your wireless network. Fill in the appropriate
value or phrase in Key Material field.

Show Password: Check this box to show the passwords

that have been entered.

OK: Click to save and apply the new settings.

Cancel: Click to leave and discard the settings.

Connect

Command to connect to the selected network inside
credentials. The active selected credential is as like as the
active selected Profile.

Rotate

Command to rotate to connect to the next network inside
credentials.

Disconnect

Stop WPS action and disconnect this active link. And
then select the last profile at the Profile Page. If there is
an empty profile page, the driver will select any
non-security AP.