PROLiNK WN2000 Wireless-N User Manual - Manual (Page 76)

- 70 -
WEP Key: Only valid when using WEP encryption
algorithm. The key must match with the AP’s key.
There are several formats to enter the keys.
• Hexadecimal (64bits): 10 Hex characters.
• Hexadecimal (128bits): 26 Hex characters.
• ASCII (64bits): 5 ASCII characters.
• ASCII (128bits): 13 ASCII characters.
Show Password: Check this box to show the
password you entered.
Beacon (ms) The time between two beacons. The system default is
100 ms.
TX Power Manually force the AP transmits power from the pull
down list 100%, 75%, 50%, 25% and Lowest. The
system default is 100%.
Idle time(60-3600)(s) It represents that the AP will idle after few seconds.
The time must be set between 60~3600 seconds.
Default value of idle time is 300 seconds.
No forwarding
among wireless
clients No beacon among wireless client, clients can share
information each other. The system default is no
forwarding.
Hide SSID Do not display AP name. System default no hide.
Allow BW 40MHz
Click to disable this function. Default is enabling.
Default Use the system default value.
Apply Click to apply the above settings.