PROLiNK WN2000 Wireless-N User Manual - Manual (Page 74)

- 68 -
Soft AP mode
Config
Config
SSID AP name of user type. User also can click Use Mac
Address button to display it.
Channel Manually force the AP using the channel. The system
default is CH 1.
Wireless mode Here supports 2.4G (included 802.11b/g/n) wireless
mode.
Use Mac Address Click this button to replace SSID by MAC address.
Security Setting Authentication mode and encryption algorithm used
within the AP. The system default is no
authentication and encryption.