PROLiNK WN2000 Wireless-N User Manual - Manual (Page 64)

- 58 -
Link Status Tab
Status
Shows the current connected AP SSID and MAC
address. If there is no connection existing, it will show
Disconnected.
Extra Info Shows the link status and Tx power percentage.
Channel Shows the current channel in use.
Authentication Authentication mode used within the network,
including Unknown, Open, WPA-PSK, WPA2-PSK,
WPA and WPA2.
Encryption Shows the encryption type currently in use. Valid
value includes WEP, TKIP, AES, and Not Use.
Network Type
Network type in use, Infrastructure for BSS, Ad-Hoc
for IBSS network.
IP Address
Shows the IP address information.
Sub Mask
Shows the Subnet Mask information.
Default Gateway
Shows the default gateway information.
Link Quality
Shows the connection quality based on signal strength
and TX/RX packet error rate.
Signal Strength 1
Shows the Receiving signal strength, you can choose
to display as percentage or dBm format.
Noise Strength
Shows the noise signal strength in the wireless
environment.