PROLiNK PPS2104N User Manual - Manual (Page 18)

EN 15
The following figure will appear.
d) Choose the desired printer. The desired printer must be the Windows printer (this is a logical printer) that
matches the printer attached on the ShareHub Device Servers (this is a physical printer). Then click the
“Apply” button.
e) Then, the printer will be marked as an “Auto-Connected Printer” in red. If you choose “Auto-Connected
Printer List” in the “Tools” menu, you can see a newly created item that describes the association between
the Windows printer and the physical printer on the server.
f) Then try to issue a print job to the desired printer. You will see the ShareHub Device Servers Control
Center will automatically do a connect operation. Then, the print job will be issued to that printer.