PROLiNK PPL1202N Quick Installation Guide - Manual (Page 13)

PROLiNK PPL1202N User Manual www.prolink2u.com
Version 1.00 (Jul’10) 13 English
Short Slot Indicates that the 802.11g network is using a short slot time because there are no legacy (802.11b)
stations present
Tx Burst Select to enable or disable connecting to a Tx Burst supported device.
Pkt_Aggregate To aggregate lots of packets into a big one before transmitting packets. This can reduce control
packet overhead.
IEEE 802.11H Support Enable/Disable.
Country Code Select wireless country code. Six countries can choose.
Wi-Fi Multimedia:
Functions Descriptions/Details
WMM Capable This will enhance the data transfer performance of multimedia contents when they’re being
transferred over wireless network.
APSD Capable Automatic Power saves Delivery. Select to enable / disable data flow using power saving mode
during transmitting.
WMM Parameters You can configure WMM parameters by clicking on the “WMM Configuration” button. The
configuration window pops up (as shown below). Manually configure the parameters and click on
the “Apply” button to execute.
Multicast-to-Unicast Converter:
Functions Descriptions/Details
Multicast-to-Unicast It can receives Multicast streams from the network backbone, converts them to Unicast format, and
routes them to the set-top-boxes of end-users over the last mile infrastructure (e.g. DSL, Ethernet,
WiFi).