PROLiNK PPL1202N Quick Installation Guide - Manual (Page 25)

PROLiNK PPL1202N User Manual www.prolink2u.com
Version 1.00 (Jul’10) 25 English
The Configuration Utility for Windows OS enables the user to find Powerline AP Ethernet devices on the Powerline AP
network; measures data rate performance, ensures privacy, performs diagnostics and secures Powerline AP networks.
Before install the utility, please check the windows edition of your computer. For Windows with 64bit architecture, it
need to install the 64bit architecture utility, you can easy to see it in the CD auto run screen. Please use the correct
utility to install; otherwise it cannot work properly.
NOTE:
The Powerline AP Device can auto detect the other Powerline AP bridges which plug in the same power
circuit, you don’t need to use this Powerline AP utility except you want to encryption all the Powerline AP
devices as the same group or you cannot access the other computers.
CAUTION:
Please verify that no other Powerline AP Management Utilities are installed before installing this product.
If other utilities are installed, uninstall them and restart before installing this software.
To install, insert the Windows OS Configuration Utility Setup utility CD-ROM into the computer's CD-ROM drive. The
Setup utility shall run automatically. Choose the correct one utility to install or user can manually install by double
clicking the setup.exe file when browse the folder. The CD will launch an installation utility similar to the one shown in
Figure 1.
This Utility is designed for Powerline AP 85M/200M Ethernet bridges. Click the Next button to continue.
Figure 1: Install Shield Screen
4.1.1 Installation of the Utility
4.1 Configuration Utility Setup
CHAPTER 4 POWERLINE NETWORKING UTILITY