Alcatel Carrier Internetworking Solutions OmniStack 6300-24 - Manual (Page 237)

System Management Commands
4-25
4
hostname
This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
User Access Commands
The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 4-10), user authentication via a remote authentication
server (page 4-67), and host access authentication for specific ports (page 4-76).
username
This command adds named users, requires authentication at login, specifies or
changes a user's password (or specify that no password is required), or specifies or
changes a user's access level. Use the no form to remove a user name.
Syntax
username name {access-level level | nopassword |
password {0 | 7} password}
no username name
• name - The name of the user.
(Maximum length: 8 characters, case sensitive. Maximum users: 16)
• access-level level - Specifies the user level.
The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec.
• nopassword - No password is required for this user to log in.
Console(config)#hostname RD#1
Console(config)#
Table 4-9. User Access Commands
Command Function Mode Page
username Establishes a user name-based authentication system at login GC 4-25
enable password Sets a password to control access to the Privileged Exec level GC 4-26