ATON DLA6 - Manual (Page 20)

18 ©2008 • All rights reserved.
DLA2/4/6 Speaker Level Audio Router
PAGE/DB TRIGGER IN Connection
The Page/Doorbell Trigger Input (PG/DB TRIG IN) needs to be connected when the DLA2/4/6 is
installed as part of a “sub-zone” of an ELAN
® Multi-Room Controller, such as the S8.6 or S12,
which utilizes an ELAN COM2 Communications Controller. This application allows the DLA Room
Outputs to pass an audible tone through the room’s speakers at a preset level when the home’s
doorbell is activated.
To conÀ gure the PG/DB TRIGGER IN, simply connect a mono 3.5mm interconnect cable
between the Page/Doorbell Trigger Out of the ELAN Multi-Room Controller and the PG/DB TRIG-
GER IN of the DLA2/4/6 as shown below.
IR EMITTER OUTPUTS
PAGE/DB
TRIG IN
S8.6
PG OUT
PG IN
MOH OUT
IN
PAGE
TRIGGER
OUT
DLA2/4/6
3.5mm Mono
Interconnect
Cable
Figure 3-9: PAGE/DB TRIG IN Connection