ATON DLA6 - Manual (Page 8)

6 ©2008 • All rights reserved.
DLA2/4/6 Speaker Level Audio Router
Rear Panel
The Rear Panel of the DLA2/4/6 has connections for Power, AmpliÀ er Input, Sense Inputs,
page/Doorbell Trigger Inputs, the RF Receiver (ATON Port), IR Emitter Outputs, IR receiver Inputs
and Speaker Outputs. Figure 1-3 and Table 1-2 provide description and location of Rear Panel
connections.
IR EMITTER OUTPUTS
IMPEDANCE
MATCH
RF
INPUT
PATENT
PENDING
PWR IN
12VDC / 2.1A
SENSE
INPUT
9VDC / 100mA
8 8
4 4
AMPLIFIER
I P
1
PA E
RI I
6 6 7 8 9
1 2 4 3 5 5
DLA2
CLASS 2 WIRING
Figure 1-3 : DLA2/4/6 Rear Panel
Connector Function
1 12 VDC Power Connector Connector for +12VDC/2.1A (PS3) Power
Transformer
2 Sense Input Connector Connector for optional +12 VDC/200mA
(PS2) Sense Status Power Transformer
3 IR Emitter Outputs 3.5mm Mono Mini Jack Connectors for Use
With ATON IR Emitters
4 Page/DB Trigger 3.5 mm. Stereo Mini-Jack Connector for use
with ELAN Communication Controllers or
equivalent
5 IR Receiver Inputs Flip Lock Connectors for IR receivers or DLA
Touchpads. IR receivers allow for individual
room control or system-wide control using
DLA discrete IR codes.*
6 Speaker Outputs 4-position Fliplock Connectors for 16
Gauge, 4 Conductor (16/4 AWG) Speaker
Leads to Room Speakers
7 Impedance Match DIP
Switches Select The Impedance Value Of the Ampli-
À er And Speakers, 4 Or 8 Ohms
8 ATON Port Connects to Optional RF Receiver
9 AmpliÀ er/Receiver Input 4-position Fliplock Connector for 16 Gauge,
4 Conductor (16/4 AWG) Speaker Leads
From AmpliÀ er or A/V Receiver Speaker
Outputs
• 125 Watts per Channel Max
Table 1-2: Rear Panel Connectors
* IR codes available for download at: www.atonhome.com. See Appendix C-3.