AEG L 96485 FL - Manual (Page 18)

ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME
For a correct operation of the weight sensor, activate the appliance and set the programme BEFORE
you put the laundry in the drum.
1. Press button 1 to activate the appliance.
2. Turn the programme knob ( 2 ) to the necessary programme or touch one of the but-
tons 5 to set a memorised programme. The programme indicator comes on.
3. The indicator of button 6 flashes with red colour.
4. The display shows the default temperature and spin. If it is necessary, touch button 12
and button 11 to change the water temperature and the spin speed.
5. If it is necessary, touch the other buttons to add some functions or to set a delayed
start. The display shows the symbol of the set function and the digit ( D ) shows the
delayed time.
LOADING THE LAUNDRY
1. Open the appliance door.
2. The display (E) shows the maximum programme load for the programme (MAX ) and
the weight of the laundry (KG). The text bar on the display tells to add the laundry.
3. Put the laundry in the drum, one item at a time. Shake the items before you put them
in the appliance.
4. On the display the weight of the laundry updates by step of kg 0.5. The weight is indi-
cative and changes with the type of the laundry.
If you put more laundry than the maximum load, the display tells that you put more than
the maximum load.
You can wash your laundry but the energy and water consumption increase.
To have the best consumption and washing performance remove some items.
The overload indication is available only for programmes with a maximum load lower than
the appliance maximum load.
5. Close the door. The text bar on the display tells the percentage of detergent to use. This
data is indicative and refers to the detergent quantity for a maximum load that the
manufacturer recommends.
18 Activating the appliance and setting a programme