ATON Source Input Wall PlateWallplate DHSIP - Manual (Page 13)

© 2008 • All rights reserved. 11
DHSIP Source Input Wall Plate
Set the RCA/OPT/COAX
Selection Switch to the
OPT position.
Digital Optical (OPTICAL IN)
Use a Digital Optical Cable to connect an audio
source that hase a Digital Optical output as shown in
Figure 3.2.
Important: See Note 2 & Note 3 on p.9 prior to
confi guring Digital Audio connections.
DHSIP Front
Audio Source
Digital Optical
Output
Digital
Optical
Cable
DIGITAL
OPTICAL
Figure 3.2: Audio Source to DHSIP Connections
Digital Optical