ATON Source Input Wall PlateWallplate DHSIP - Manual (Page 15)

© 2008 • All rights reserved. 13
DHSIP Source Input Wall Plate
IR OUT
Connect a standard IR Emitter (ATON AIE2, for exam-
ple) from the IR OUT port on the front of the DHSIP to
the IR receiver on the front of the audio source (see
Figure 3.4). For sources that have an IR Input port on
the back of the unit, use a 3.5mm to 3.5mm mono
interconnect cable instead (see Figure 3.5).
DHSIP Front
AIE2
Talk-Back
Emitter
CD
Figure 3.4: IR OUT to Local Source - IR Emitter