SPP Pumps Auto Prime Q Series - QI200 User Manual
Page 9
Operators Instructions for
AUTOPRIME Q Range Pump Unit
Manual No/Rev
W72-008E / 9
Our policy is one of continuous improvement and we reserve the right to alter specifications at any time
Page 9 of
18
The maintenance schedule is given for guidance only. Site operating conditions may override the
suggested maintenance intervals. Adjustments to time scales will also have to be made if the pump is idle
for long periods.
Note: Due to the initial stretch of new vacuum pump drive belts, it is necessary to check and re-tension
the drive belts after the first 50 hours running time on all new pumps and following the fitting
new drive belts. (See section 7.9)
IMPORTANT - Prior to movement or transport, check the following items:-
Wheel nut security.
Tyre condition.
Towing hitch condition and security.
Tyre pressures.
Brake adjustment (For road trailer where brakes are fitted)
Towing ‘A’ frame fasteners.
Axle fasteners.
Lifter and stay fasteners.
Engine to pump & chassis fasteners.