Teledyne TED-200 - Medical application oxygen monitor - Manual (Page 2)

Teledyne Analytical Instruments i i
Copyright © 1999 Teledyne Electronic Technologies
All Rights Reserved
No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any other language or computer language in whole or in part,
in any form or by any means, whether it be electronic, mechanical, optical, manual, or
otherwise, without prior written consent of Teledyne Electronic Technologies, 16830
Chestnut Street, City of Industry, CA 91749–1580
FCC Statement
This equipment generates and uses radio frequency energy, and if not installed and used
in strict accordance with the manufacturer's instruction manual, may cause interference
to radio and TV communications. It has been type-tested and certified to comply with
the limits for a Class A, and exceeds limits for a Class B, computing device pursuant to
Subpart J of FCC Rules, which are designed to provide reasonable protection against
such interference when installed in a commercial and residential environment. Opera-
tion of this equipment in a residential area may cause interference, in which case the
user, at his own expense, will be required to take whatever measures may be required to
correct the interference.
Note: The above statement is required by the FCC for any device that incorporates
microprocessors.
NOTE: This analyzer has been evaluated according to ISO 7767
1997 Non compliances to this standard exist in relation to
the requirements for Alarm frequency, audibility, maximum
silence period, and low alarm threshold minimum level.