E-Mon EIDR-16J*RJ - Manual (Page 11)

INTERVAL DATA RECORDER (IDR)
11 62-0394-03
5.0 IDR DISPLAY
The IDR display allows you to manually enter information into the unit. Four push
buttons on the circuit board that is mounted to the door of the meter are utilized for this
function.
The push buttons provide access to entering the time and date, the device ID, and the
IP settings. Load control is not presently available through the IDR .
Pressing the MENU button allows access to the function menu, up and down buttons
are used to move the pointer.
The SELECT button allows entry to each of the functions. Repeated use of this button
allows the object selected to be modified.
The UP and DOWN buttons are used to modify the object that was selected. Once
changed, the SELECT button is used to move to the next object to be modified. When
completed, press the MENU button to save the setting and exit the function.
The display shows the accumulated meter readings and the load reading of each of
the input channels. The input pulse value must be entered through E-Mon Energy
software .
Fig. 6. IDR Display Board.
M33474
DOWN
UP SELECT
MENU