Aristokraft LD425C User Manual
Page 106
Copying
84
2
B
Select [1 Sided → 2 Sided] or [2 Sided → 2 Sided].
C
Press [OK].
D
Place the originals, and then press the {Start} key.
Note
❒ You cannot use the bypass tray with this function.
❒ The maximum paper weight that can be used with duplex copying is 64–
105 g/m
2
(17-28 lb.).
❒ When placing an original on the exposure glass, start with the first page to
be copied. When placing an original in the ADF, set so that the last page is
on the bottom.
❒ You can also select “1 Sided to 2 Sided” or “2 Sided to 2 Sided” directly by
pressing the Copy Function Key in step
. In that case, proceed to step
.
❒ To change originals and copy orientation in step
, press [Orientation].
❒ When placing an original on the exposure glass or in the ADF using Batch
mode, press the {q} key after all the originals have been scanned.
❒ For related initial settings, see “Front Margin: Left / Right”, “Back Margin:
Left / Right”, “Front Margin: Top / Bottom”, “Back Margin: Top / Bot-
tom”, General Settings Guide.
Reference
See p.99 “Margin Adjustment”.