Aristokraft LD425C - Manual (Page 173)

Using the Document Server
151
3
To change a file name
Following describes the procedure for changing a name to be attached to a
stored document.
A
Display the original scan screen.
B
Press [File Name].
The document name change screen will appear.
C
Press [Clear] to delete the document name to be automatically set.
D
Enter document name and then press [OK].
Note
❒ In Step C , pressing [Backspace] allows you to delete up to any desired loca-
tion.
❒ You can enter up to 10 full size or 20 half-size characters for a document
name. In the list, however, up to 8 full size or 16 half-size characters are dis-
played as the document name. If above limits are exceeded, the list will
display up to 7 full size or 15 half-size characters for the document name.