Aristokraft LD425C - Manual (Page 69)

Color Functions
47
2
Changing the registered contents
Changes contents stored in Color balance programs.
A
Press [Edit / Color].
B
Make sure that [Color] is selected before pressing [Adjust Color].
C
Make sure that [Color Balance] is selected before pressing [Program Color Bal-
ance]
.
D
Select the program number ([1]-[3]) to be changed.
The programmed Color balance appears.
E
Change the registered contents.
F
After the programmed contents are changed, press [Program Color Balance].
G
Press [Program], and then press the program number to be overwritten.
H
Press [Yes].
The program is overwritten.
I
Press [OK]twice.
Copying with the registered contents
Recalls and copies contents stored in Color balance programs.
A
Press [Edit / Color].
B
Make sure that [Color] is selected before pressing [Adjust Color].
C
Make sure that [Color Balance] is selected before pressing [Program Color Bal-
ance]
.
D
Make sure that [Recall] is selected, and then select the program number reg-
istered by the Color balance to be used.
E
Press [OK] twice.