Aristokraft LD425C - Manual (Page 147)

Copier Functions
125
2
G
Place your original, and then press the {Start} key.
Specified Area Repeat
Repeatedly copies a specified portion of the image.
Determine the location of the area's base point and its length and width.
A Set on the exposure glass
Important
❒ You cannot use this function from the ADF.
A
Measure the location of the base point (X1, Y1) and its length and width (X2,
Y2) for the area of the image repeatedly copied.
You can set any value in the range of X1: 0-412 mm (0”-16.2”), X2: 20-432 mm
(0.8”-17.0”), Y1: 0-277 mm (0”-10.8”), and Y2: 20-297 mm (0.8”-11.6”).
B
Select the size of copy paper and the reproduction ratio.
C
Press [Edit / Color].
D
Press [Edit Image].
E
Press [Image Repeat].
F
Press [Specified Area].
G
Enter the length of [X1] with number keys, and then press {q} key.
H
Enter the length of [Y1] with the number keys, and then press {q} key.
I
Enter the length of [X2] with the number keys, and then press {q} key.
J
Enter the length of [Y2] with the number keys, and then press {q} key.
GCRE032E