Aristokraft LD425C - Manual (Page 93)

Copier Functions
71
2
Directional Size Magnification (mm)
Specify the horizontal and vertical lengths of the original and copy image. Cop-
ies can be reduced or enlarged at different reproduction ratios horizontally and
vertically.
A Horizontal original size: Amm
B Vertical original size: Bmm
C Horizontal copy size: amm
D Vertical copy size: bmm
Measure and specify the lengths of the original and copy by comparing “A” with
“a” and “B” with “b”.
A
Press [Reduce / Enlarge].
B
Press [Dir. Size Mag. mm].
C
Enter the horizontal size of the original with the number keys, and then
press {q} key.
You can enter sizes between 1 to 999 mm in 1 mm (0.1”) steps.
D
Enter the horizontal size of the copy with the number keys, and then press
{q} key.
E
Enter the vertical size of the original with the number keys, and then press
{q} key.
CP2M01EE