Appliance selfćtest, Customer service – Bosch KAN62V40 Frigo-congelatore Side by Side Inox look User Manual

Page 28

Advertising
background image

28

No display on the display
panel.

The mains plug of the appliance is not in the socket

properly. The fuse for the domestic supply is switched
off.

Check whether the power is on, the fuse must be switched

on.

The interior light is not
functioning.

The light switch for the freezer or refrigerator

compartment is sticking.

Check whether the light switch can move.

The light (LED) is defective.

See chapter Light".

The appliance becomes
slightly louder for a brief
period.

Not a fault! Your appliance is designed to save energy. Under certain conditions (e.g. activation of the Super function)

the appliance must work harder for a brief period and therefore becomes slightly louder.

Appliance has no
refrigerating capacity.
The interior light is not
functioning.

Power failure; the fuse has been switched off;

the mains plug has not been inserted properly.

Check whether the power is on, the fuse must be switched

on.

The refrigerating unit
is switching on more
frequently and for longer.

Appliance door opened frequently.

Do not open the door unnecessarily.

Large quantities of fresh food are being frozen.

Do not exceed max. freezing capacity.

The ventilation openings have been covered.

Remove obstacles.

The temperature in the
refrigerator or freezer
compartment is too cold.

Temperature has been set too low.

Select a warmer temperature (see Setting the

temperature").

The frozen food is frozen
solid.

Loosen frozen food with a blunt object. Do not use a knife or

pointed object.

Appliance selfĆtest

Your appliance features an automatic

selfĆtest program which shows you

sources of faults which may be repaiĆ

red by customer service only.

Starting the appliance

selfĆtest

S Switch off the appliance and wait

5 minutes.

S Switch on the appliance again.

S Simultaneously press button +" and

-" button for 5 seconds.

The selfĆtest programme starts. If E.."

is indicated on the display panel,

an error has occurred. If a fault is

indicated, inform customer service.

Ending the appliance selfĆtest

S Press the +" and -" buttons again

for 5 seconds.

Customer service

Your local customer service can be

found in the telephone directory or in

the customerĆservice index. Please

provide customer service with the apĆ

pliance product number (EĆNr.) and

production number (FD).
This information can be found on the

product label.

2

To prevent unnecessary callĆouts, pleaĆ

se assist customer service by quoting

the product and production numbers.

This will save you additional costs.

en

Advertising