LOCKSTATE LS-60 Operation Guide - Manual (Page 11)

PG
10
PG
10
PG
11
F
C
Set -
Touch this to switch the temperature display scale from oF to oC .
FILTER
- AIR FILTER ALERT - The LS-60 can be programmed to remind you when the HVAC
sytem’s air filter needs changing.
Touch FILTER. The display will show the usage to date.
Touch FILTER for over 3 seconds and the display will change to LIMIT.
Touch arrows to set desired usage limit before filter alert comes on home screen.
When this limit is reached, FILTER will be on home screen and the CHECK FILTER indicator lights.
Limit may be set from 0 to 999 days/99 weeks; default is 90 days/12 weeks. Touch to reset.
To reset the usage back to 0, touch usage number; touching it again restores the displayed usage.
Touch
to return to the MENU screen.
LOCK (The LS-60 has 2 lock modes)
Touch
icon for 5 seconds; the unit will go into the PARTIAL lock mode. The user can temporarily
override the LS-60 target with the +/- buttons only. (1 bar)
For FULL lock : Touch the (1 bar) icon again for 5 seconds to go to full lock. No changes can be
made in full lock (2 bars). Once locked, the LS-60 will respond just to mode and menu.
To UNLOCK , Press MENU.
Touch and hold
icon for 5 seconds for 2 bars (if not there already).
Then touch and hold the
icon for another 5 seconds. Each 5 second touch and hold must be separate.
Touch to return to the Home screen.