Caution, Compressor protection, Communicating thermostat – LOCKSTATE LS-60 Operation Guide User Manual

Page 16: Using usnap radios

Advertising
background image

PG

16

PG

16

Compressor Protection

The LS-60 has a minimum cycle time of 4 minutes to protect your

compressor in cool and in heat pump (if you have one). The Home screen will show a small clock and

A/C during this time and the compressor will not come on until the 4 minute delay is over.

Communicating Thermostat

The LS-60 has 2 RTM-1 radio ports. These allow your thermostat

to communicate with other systems.

Using USNAP Radios

The USNAP ports allow you to connect

your LS-60 to a wireless network. This can give you access to your

home’s HVAC system even when you are away. It can also give

you access to web based efficient energy management sites that
can help you save money and protect the environment.

To Insert a USNAP radio module:

Power off the LS-60. Insert the radio module in either slot on the

back of the LS-60. Power up LS-60.

To connect

to a network follow the instructions that came with the

USNAP module.

USNAP port

USNAP
radio

Caution

DO NOT INSERT or REMOVE USNAP radio

modules if power is ON. This can damage the
thermostat or radio modules.

Advertising