LOCKSTATE LS-60 Operation Guide - Manual (Page 14)

PG
14
PG
14
weekly program. To use it touch HOLIDAY on the temporary screen. The default holiday program is
shown below. To modify this program, touch the PROGRAM button and then touch the DAY area until
HOLIDAY appears (after SAT). The default HOLIDAY program is set as 2 time slots; all day (same
target MORN, DAY and EVEN) and a different target for NITE. [Default program: HEAT 70
o F all day
and 62 o
F at night. COOL 78
o F all day and 82 o
F at night.]
EMER (in HEAT PUMP type)
If you set your LS-60 for HEAT PUMP with auxiliary heat, EMER function is available on the MANUAL
scre
en. If you touch EMER, it displays EMER|ON. Your HEAT PUMP is disabled and auxiliary heat
is your sole source of heat. This manual override stays active until you toggle EMER off. Auxiliary
heat is more expensive than the heat pump so use EMER only if the heat pump cannot keep up or is
defective.
Other Functions
Save Energy Button
The “Save Energy” feature on the LS-60 provides a simple, easy-to-use way to help you manage your
energy use. SAVE ENERGY automatically adjusts your Target Temperature up in COOL or down in
HEAT by 4
o
F. To use Save Energy, press the Save Energy button in the upper left corner of the unit.
The screen will now read “Save Energy”. To return to normal operation, press the “Save Energy”
button again. This is useful to save energy if you are gone for a short time.