Ransburg Turbodisk 2 Assembly 78715 - Manual (Page 23)

Turbodisk 2 - Operation
19
ELECTROSTATIC VOLTAGE
In the system, the high voltage is supplied to the
Turbodisk 2 by either the MicroPak Industrial power
supply system or Voltage Master series power
supplies.
The MicroPak Industrial power supply uses
proven high voltage generator technology that
is microprocessor controlled for diagnostics and
communication. The controller is packaged in
standard rack mounted Eurocard format for easy
access and system integration.
The Voltage Master power supplies are general
purpose heavy duty power supplies with years of
proven reliability. They have variable voltage control,
many safety features, and remote analog voltage
control capabilities.
TARGET DISTANCE
The distance between the Turbodisk 2 and the target
will affect the finish quality, penetration and efficiency.
Closer distances give wetter finishes and greater
efficiency, while greater distances give drier finishes.
The recommended normal disk edge to target range
is 12 inches minimum for optimum performance.
NOTES:
LN-9240-02.1