Ransburg Turbodisk 2 Assembly 78715 - Manual (Page 5)

SAFETY PRECAUTIONS
Before operating, maintaining or servicing any
Ransburg electrostatic coating system, read and
understand all of the technical and safety literature
for your Ransburg products. This manual contains
information that is important for you to know and
understand. This information relates to USER SAFETY
and PREVENTING EQUIPMENT PROBLEMS. To help
you recognize this information, we use the following
symbols. Please pay particular attention to these
sections.
A WARNING! states information to alert you to a
situation that might cause serious injury if instructions
are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the procedure in
progress.
While this manual lists standard specifications and
service procedures, some minor deviations may be
found between this literature and your equipment.
Differences in local codes and plant requirements,
material delivery requirements, etc., make such
variations inevitable. Compare this manual with
your system installation drawings and appropriate
Ransburg equipment manuals to reconcile such
differences.
Careful study and continued use of this manual will
provide a better understanding of the equipment and
process, resulting in more efficient operation, longer
trouble-free service and faster, easier troubleshooting.
If you do not have the manuals and safety literature
for your Ransburg system, contact your local Ransburg
representative or Ransburg.
SAFETY
Turbodisk 2 - Safety
> The user MUST read and be familiar with the
Safety Section in this manual and the Ransburg
safety literature therein identified.
> This manual MUST be read and thoroughly
understood by ALL personnel who operate, clean
or maintain this equipment! Special care should
be taken to ensure that the WARNINGS and safety
requirements for operating and servicing the
equipment are followed. The user should be
aware of and adhere to ALL local building and fire
codes and ordinances as well as NFPA 33 SAFETY
STANDARD, 2000 EDITION, prior to installing,
operating, and/or servicing this equipment.
W A R N I N G
!
> The hazards shown on the following page may
occur during the normal use of this equipment.
Please read the hazard chart beginning on page
2.
W A R N I N G
!
1 LN-9240-02.1