Acer P1166 - Manual (Page 86)

P1166 / P1266 / P1266i / P1166P / P1266P Confidential 5-4
5-3 USB Driver Upgrade
Procedure
1. set up
- Plug in Power cord to projector.
- Link PC USB port and projector USB port
by USB Cable.
2. Execute Program
(1) Found new hardware wiszard will be
appearred on the screen.
(2) Select Install the software automatically
(Recommended).
(3) Then click Next.
3. Finish
- Click Finish to end the installation.
Note: If you have installed the USB driver,
there is no need to perform this action.
(2)
(3)
(1)