Chapter 2 disassembly& assembly process, Disassembly& assembly process, 1 equipment needed & product overview – Acer P1166 User Manual
Page 24
Advertising
P1166 / P1266 / P1266i / P1166P / P1266P Confidential
2-1
Chapter 2
Disassembly& Assembly Process
2-1 Equipment Needed & Product Overview
1. Screw Bit (+) :107
2. Hex Sleeves 5mm
3. Hex Sleeves 8mm
4. Tweezers
5. Long Nose Nipper, Angle Cutting Nipper
6. Sider Cutter Pliers
7.
Projector
* Before you start: This process is protective level II. Operators should wear electrostatic chains.
* Note: - If you need to replace the main board, you have to get into service mode and record the
lamp usage hour. please refer to section 2-22.
- The disassembly and assembly process for P1166 / P1266 / P1266i / P1166P / P1266P is
the same . Here we take P1266 as an example.
Advertising