SecurityMan SmartCamDVR - User manual - Manual (Page 20)

16
OverWrite
The OVERWRITE option allows you to enable the SmartCamDVR to
record continuously when the Micro SD Card is full. When set to “ ON”
(default), the SmartCamDVR will automatically start recording over
previously recorded footage ensuring that the DVR will record new
events as they occur. To make changes to the overwrite setting, click
on the
(down) arrow to select between ON and OFF as illustrated
below. When set to “ OFF” the SmartCamDVR will stop recording when
the memory card becomes full. Click on the SAVE button at anytime to
confirm and save your changes.