SecurityMan SmartCamDVR - User manual - Manual (Page 31)

Reset hole
MIC Buzzer
Reset
27
System Reset
The reset button should only be used in the event that the SmartCamDVR’s
buttons or functions start to act abnormal or erratic. Events such as: not
being able to shut off the device, not being able to start or stop manual
recording or not being able to start or stop motion detection recording,
etc. If you should come across any of the incidents mentioned above,
please use the included plectrum to press and hold the reset button for 3
seconds to reset the SmartCamDVR.
Installation
1. Make sure the Micro SD card (up to 32GB) is inserted into the Micro SD
slot as illustrated below.